-GENERAL INFORMATION FOR APPLICATION-
1.DC. Electrolytic capacitors can be used on DC circuit only. The polarities to be with "+"and "-"only, it is indicated on proper position or aside of lead wire/terminal.
2.Non-polarized capacitors can be used on both AC and DC circuits.
3.If unclear or unknown of polarity of circuit indication. Non-polarized capacitor was recommended to be used.
4.Capacitors should not be used at environ mental temperature which exceeds the range of specified operating temperature.
5.Capacitors should be stored in cold  and dry place.
6.Re-aging process with rated voltage must be taken prior to using ,if  it has been long time
   stored.
7.Capacitors are not suitable for operating with sudden charge and discharge which are
  frequently  repeated.
8.Capacitors are not suitable for operating at the current value which over the allowable ripple
    range. If high ripple is required, please contact us with details.
9.Applied working voltage to capacitor which does not exceed the rated working voltage of
   capacitor.
10.To protect inside construction of capacitors, over pull or excessive force to lead wire/terminal
    wave is not permitted.
11.Soldering irons should be kept away from the vinyl insulation sleeve of capacitor, to avoid  
     the  cause made over heat or break down to sleeve.  
12.Capacitor in dip soldering process, the soldering temperature should never over 260C for to
     second of soldering time.
13.Protection for sleeve, marking and sealing materials on capacitor body not to be damaged,
    capacitor body not to be damaged, capacitors should never be washed or cleaned by
    halogenous agents or solvents such as trichloroethene, Xylene or acetone etc.
14.Designed capacitors quality meets JIS C-5141W
15.Preparation or after treatment testing for reliability in according with JIS C-5102
16.